PPE regulation for UK and EU sellers: categories, certificates and labels

The PPE Regulation (EU) 2016/425 covers products designed to be worn or held to protect the user against risks to health or safety, from sunglasses and gardening gloves to cycling helmets, hi-vis vests and FFP2 masks. Everything in scope needs CE marking, and anything above the lowest risk category needs an independent body to examine it before you can sell it. Great Britain applies its own version of the same regulation.

This guide is for brands outside the UK and EU selling PPE on Amazon or other marketplaces. If you need an EU or UK name and address for your labels and listings, see our EU and UK Responsible Person service.

PPE risk categoriesPPE falls into three risk categories that rise in risk. Category I covers minimal risks and is self assessed under Module A, for example sunglasses and gardening gloves. Category II covers medium risks and needs a notified body under Modules B and C, for example cycling helmets and visibility vests. Category III covers serious or fatal risks and needs a notified body under Modules B and C2 or B and D, for example FFP2 masks, chemical gloves and harnesses. Category III CE marking shows the notified body number.PPE risk categoriesRising riskCategory IMinimal riskCategory IIMedium riskCategory IIISerious orfatal riskSelf assessedNotified bodyNotified bodyModule AModules B + CB + C2 or B + DSunglassesCycling helmetsFFP2 masksGardening glovesVisibility vestsChemical glovesHarnessesCategory III marking shows the body’s number.
The three PPE risk categories, how each is assessed and typical marketplace examples.

Who the PPE Regulation applies to

The regulation applies to PPE for both professional and private use, and to the manufacturers, importers, authorised representatives and distributors who make it available. If you put your brand on PPE made by a factory abroad, you are the manufacturer.

Whether a product is PPE depends largely on what it is designed and sold to do. Gloves sold to protect against cuts or chemicals are PPE; fashion gloves are not. Sunglasses are PPE because they protect the eyes from sunlight. The regulation excludes some products, including PPE designed for private use against weather conditions that are not extreme, or against damp and water during dishwashing, PPE for the armed forces or law enforcement, and motorcycle helmets covered by UNECE Regulation 22.

The laws that apply

MarketLawMarkingThird-party body
EURegulation (EU) 2016/425CEEU notified body (Categories II and III)
Great BritainRegulation 2016/425 as it applies in GB, with the PPE Enforcement Regulations 2018CE or UKCAEU notified body for CE, UK approved body for UKCA
Northern IrelandRegulation (EU) 2016/425CE, or CE with UKNIEU notified body, or UK notified body for UKNI

The UK government extended recognition of CE marking for PPE in Great Britain indefinitely in 2024, so a CE-marked product can be sold in GB without a UKCA mark. GPSR (EU) 2023/988 also applies alongside the PPE Regulation for matters the PPE rules do not cover, such as the information required on online listings.

The three risk categories

CategoryRisks coveredConformity assessmentTypical products
IMinimal risks, such as superficial mechanical injury, mild cleaning agents, hot surfaces up to 50°C and sunlightModule A: the manufacturer self-assessesSunglasses, light gardening gloves
IIRisks not listed in Category I or IIIModule B (EU type-examination by a notified body) plus Module CCycling helmets, high visibility clothing, many work gloves
IIIRisks that can cause very serious consequences such as death or irreversible damage to health, including harmful substances, falls from height, chemicals and biological agentsModule B plus C2 or D, with ongoing notified body checksFFP2 and FFP3 masks, chemical protective gloves, fall arrest harnesses

What the product, label and documents need

On the product and packaging

  • CE marking, followed for Category III by the identification number of the notified body that monitors production
  • a type, batch or serial number
  • the manufacturer’s name, registered trade name or trade mark and postal address
  • the importer’s name and address where there is one
  • the markings the harmonised standard requires, such as size, performance levels and pictograms

Instructions and the declaration

Every item must come with the manufacturer’s instructions and information, in a language the user can easily understand. In Great Britain that means clear, legible English. The instructions must include either the EU Declaration of Conformity or the internet address where it can be accessed.

Behind the product

The technical documentation includes the design, the risk assessment, the harmonised standards applied and the test reports. Common standards on marketplaces include EN ISO 12312-1 for sunglasses, EN 1078 for bicycle helmets, EN ISO 20471 for professional high visibility clothing, EN 149 for filtering half masks, EN 388 for gloves against mechanical risks and EN ISO 374 for gloves against chemicals and micro-organisms. For Categories II and III, the EU type-examination certificate is part of the file. Keep it all for 10 years after the PPE is placed on the market. Our technical file guide and Declaration of Conformity guide explain the structure.

Masks and gloves: PPE or medical device?

FFP2 and FFP3 respirators are Category III PPE. Surgical masks are medical devices under separate rules, and fabric face coverings with no protective claim are usually neither. Disposable gloves can be PPE, medical devices or both, depending on what they are designed and marketed for. Check how your product is described before you choose a route.

Why a non-EU or non-UK seller needs a responsible person

PPE is one of the product types for which EU market surveillance law requires an economic operator established in the EU: a manufacturer, importer, authorised representative or fulfilment service provider. Their name and contact details must be on the product, packaging or accompanying document, and they must be able to give authorities the declaration and technical documentation.

For Great Britain, the importer or authorised representative must be UK-based. Importers must check the conformity assessment, marking and declaration, keep the documents for 10 years and cooperate with enforcement authorities. Our article on UK Responsible Person requirements and our guide to UKCA marking cover the GB side in more detail.

Common Amazon pitfalls

  • The wrong kind of certificate. A test lab’s “certificate of compliance” or a voluntary attestation is not an EU type-examination certificate from a notified body.
  • Certificates that do not match. The certificate must cover your product and manufacturer. A factory’s certificate in its own name does not automatically cover your brand.
  • Expired certificates. EU type-examination certificates last for a maximum of five years and must be renewed.
  • Unchecked notified body numbers. Check the body and its scope in the European Commission’s NANDO database.
  • Missing Category III number after the CE marking.
  • Unsupported claims such as “FFP2”, “cut resistant” or “UV400” in a title without test reports to back them.
  • Instructions only in English on EU stores, or missing user information leaflets.

Amazon may ask for the declaration, certificates and test reports before PPE can be listed, so check the category requirements in Seller Central before you list.

PPE compliance checklist

  1. Confirm the product is PPE and not excluded or a medical device.
  2. Decide its risk category from the regulation’s Annex I.
  3. Identify the harmonised standards and test the exact model.
  4. For Categories II and III, get an EU type-examination certificate in your name, and set up production monitoring for Category III.
  5. Build the technical documentation and sign the EU Declaration of Conformity (and the UK one if you use UKCA).
  6. Mark the product with CE (plus the body number for Category III), batch number and your details.
  7. Write instructions in each local language, including where to find the declaration.
  8. Appoint an EU responsible person and a UK importer or authorised representative, and add their details.
  9. Track certificate expiry dates and keep everything for 10 years.

Your next step

If you sell PPE into the EU or Great Britain from outside, EU Brand Support can act as your EU or UK Responsible Person, giving you an address for labels and listings, checking your certificates and declaration before taking a product on, holding your technical documentation and handling authority requests. Our PPE compliance template pack includes Declaration of Conformity, risk assessment and technical file checklist templates in EU and UK versions. Questions about a specific product? Contact us.

This guide is general information, not legal advice. Check the rules for your specific product.

Frequently asked questions

Are sunglasses PPE?

Yes. Sunglasses protect against sunlight and are usually Category I PPE, so the manufacturer self-assesses them, commonly against EN ISO 12312-1, and adds CE marking.

Do cycling helmets need a notified body?

Yes. Bicycle helmets are usually Category II PPE, so they need an EU type-examination certificate from a notified body before CE marking.

Is CE marking still accepted for PPE in the UK?

Yes. Great Britain recognises CE marking for PPE with no end date. You still need a UK-based importer or authorised representative.

Can I use my factory’s certificate?

Only if it covers your product and you are named as the manufacturer, or you have an arrangement with the certificate holder that the notified body accepts. Otherwise you need your own certificate.

Sources