A declaration of conformity (DoC) template follows the EU model in Decision 768/2008/EC, Annex III: a product number, the manufacturer’s name and address, a sole-responsibility statement, product identification, the laws met, the standards used, any notified body, then place, date, name, function and signature. It is for CE-marked products, not every product.
This guide gives you a fill-in template with the source of each line, a worked example for a fictional business, the ways a UK DoC differs, and the mistakes to check for before you sign. If you sell from outside the EU or UK and need someone to check your DoC and hold your file, see our EU and UK Responsible Person service.
What is a declaration of conformity?
An EU declaration of conformity is a legal document the manufacturer, or its authorised representative, signs to declare that a product meets the EU requirements that apply to it. By signing it, the manufacturer takes full responsibility for the product’s compliance. It is signed only after the conformity assessment is done and the technical documentation is compiled.
The DoC belongs to the CE marking system. CE marking is only required for products covered by EU rules that specifically mandate it, and where no such rules exist, CE marking must not be used. If your product is covered only by the General Product Safety Regulation, there is no DoC to write: the manufacturer carries out an internal risk analysis and draws up technical documentation (GPSR Article 9(2)). Our GPSR guide covers that side.
It is not a certificate. There is no central EU body that gives you permission or a certificate to use the CE mark: the manufacturer draws up and signs the DoC itself. Where a law requires a notified body, that body’s details and certificate are referred to in the DoC.
The declaration of conformity template, line by line
EU product laws built on the common framework give the DoC the model structure in Annex III of Decision 768/2008/EC. What a DoC must include still varies by product law, so check the law for your product before you fill this in. Copy the eight parts below into your own document:
| Part | What to write | Where it comes from |
|---|---|---|
| Heading and No. | “EU declaration of conformity” and a unique identification of the product | Annex III, point 1 |
| Manufacturer | Name and full business address of the manufacturer, or of its authorised representative | Annex III, point 2 |
| Responsibility statement | “This declaration of conformity is issued under the sole responsibility of the manufacturer.” | Annex III, point 3 |
| Object of the declaration | Identification of the product that allows traceability: model, type or serial number. It may include a photograph | Annex III, point 4 |
| Conformity statement | That the product described is in conformity with the relevant EU harmonisation legislation, followed by each law | Annex III, point 5 |
| Standards | The harmonised standards used, or the other specifications conformity is declared against | Annex III, point 6 |
| Notified body (where applicable) | Name and number of the notified body, what it did, and the certificate it issued | Annex III, point 7 |
| Additional information and signature | Anything extra, then “Signed for and on behalf of:”, place and date of issue, name, function and signature | Annex III, point 8 |
Three rules sit around the template. The DoC must be translated into the language or languages required by the EU country where the product is sold. It must be kept up to date. And it is signed by someone with legal authority to represent the manufacturer or authorised representative, typically a director, compliance officer or senior manager, who does not need to be an EU citizen or resident.
Declaration of conformity example (fictional business)
Example only. Fern & Flint Ltd, its product and every detail below are invented. The laws and standards are left as placeholders because they depend entirely on your product.
EU declaration of conformity No. FF-LT2-2026
1. Product: Fern & Flint trail lantern, model LT-2, serial numbers from LT2-26-0001
2. Manufacturer: Fern & Flint Ltd, [full postal address]. Authorised representative: [EU name and address, if appointed]
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration: rechargeable camping lantern, model LT-2, as shown in the attached photograph.
5. The object of the declaration described above is in conformity with the relevant EU harmonisation legislation: [each Regulation or Directive that applies, with its number and title].
6. Standards: [each harmonised standard used, with its number and year, copied from the test reports].
7. Notified body: [name, number, what it did, certificate number], or “not applicable” if the law lets you self-declare.
8. Additional information: [optional, for example test report numbers]. Signed for and on behalf of: Fern & Flint Ltd. [Place], [date of issue]. [Name], [function], [signature].
For a filled-in electronics example with the Low Voltage, EMC and RoHS directives already named, see our EU Declaration of Conformity template for consumer electronics.
UK declaration of conformity: what changes
For Great Britain (England, Scotland and Wales), government guidance says a DoC is a formal statement that the product complies with the applicable legislation, drawn up once the manufacturer is assured the product is compliant, and offers an example UK DoC template to download. What goes in it varies by product regulation. The guidance says it may include the manufacturer’s or authorised representative’s name and full business address, the product’s serial number, model or type, a full-responsibility statement, any approved body, the legislation, the standards with their dates, the signatory’s name and signature, the date of issue and supplementary information.
| EU DoC | UK DoC (Great Britain) | |
|---|---|---|
| Legislation listed | The EU harmonisation legislation that applies | UK legislation, or recognised EU product regulations |
| Standards | Harmonised standards or other specifications | Designated (UK) or harmonised (EU) standards, including the date of the standard |
| Third-party body | EU notified body, where required | UK approved body, which certifies for UKCA only. EU notified body certificates can be used in GB under CE recognition or Fast-Track UKCA |
| Authorised representative | Established in the EU | Established in the UK |
| How long to keep it | The most recent DoC for 10 years after the product is placed on the EU market | Typically 10 years after each individual product is placed on the GB market |
| Other names | Sector laws may use their own model | Some regulations call it a Declaration of Performance (DoP); partly completed machinery uses a Declaration of Incorporation (DoI) |
Great Britain continues to recognise CE marking for many product types, with no end date stated, though medical devices, construction products and some others have separate rules. For UKCA or CE goods in GB, importers and authorised representatives must be established in the UK, so an EU representative does not cover GB. Northern Ireland has its own guidance. Our UKCA marking guide covers which products can be self-declared in GB, and UK Responsible Person requirements by product type covers who you need there.
Common mistakes to check before you sign
- Writing a DoC for a product no CE law covers. If no harmonised rule requires CE marking, the mark must not be used. Prepare the GPSR risk analysis and technical documentation instead.
- Signing before the work is done. The DoC comes after the conformity assessment and the technical documentation, not before.
- A product description nobody can trace. Use the model, type or serial number exactly as it appears on the product, so the DoC can be matched to the item.
- Relying on your suppliers’ CE marks. If you place the finished product on the market, your DoC covers the whole product, even if its components are already CE marked.
- Laws listed without standards. Name the standards or specifications you actually used, with their dates (the GB guidance asks for the date of each standard), and the notified body details where one was involved.
- The wrong signatory. It must be someone with legal authority to represent the manufacturer or authorised representative, with their name, position, signature and date.
- No translation. Each EU country where you sell can require its own language or languages.
- A DoC that never changes. Update it when the product, its components or materials, the applicable law or standards, the manufacturer’s or representative’s contact details, or the assessment body or procedure change. A substantial modification can mean a new conformity assessment.
- Not knowing where it must be. A DoC is made available to market surveillance authorities on request, but some laws, such as the one for radio equipment, require it to accompany the product.
Get the template and a second pair of eyes
Our compliance template packs include Declaration of Conformity, risk assessment and technical file templates by product category. If your catalogue spans several categories, the all-category compliance bundle has all ten category packs, 30 documents in total. A template is a starting point, not compliance: your product still has to meet the rules that apply to it, which usually means test reports.
If you sell into the EU or GB from outside, our EU and UK Responsible Person service reviews your Declaration of Conformity, risk assessment and test reports before taking you on, and holds your technical file for authority requests.
This guide is general information, not legal advice. Check the law for your specific product.
Frequently asked questions
What is a declaration of conformity?
A signed legal document in which the manufacturer, or its authorised representative, declares that a product meets the EU requirements that apply to it and takes full responsibility for that. It is part of the CE marking process.
Is a declaration of conformity a certificate?
No. The manufacturer draws it up and signs it. No central EU body issues a certificate for CE marking, although where a law requires a notified body, its certificate is referred to in the DoC.
Does every product need a declaration of conformity?
No. It applies to products under EU laws that require CE marking, such as toys, electrical equipment and personal protective equipment. Other consumer products sold in the EU fall under general product safety rules, where the requirement is a risk analysis and technical documentation.
Who can sign a declaration of conformity?
Someone with legal authority to represent the manufacturer or its authorised representative, typically a director, compliance officer or senior manager. They don’t need to be an EU citizen or resident.
How long do I keep a declaration of conformity?
In the EU, keep the most recent DoC for 10 years after the product is placed on the market. In Great Britain it is typically 10 years after each individual product is placed on the market, but check the regulation for your product.
Is there a declaration of conformity template for medical devices?
Medical devices have their own EU and GB rules, so check the medical device regulation for what its DoC must contain before you use a general template. In Great Britain only some Class I devices can be self-declared under the Medical Devices Regulations 2002.
Sources
- Decision No 768/2008/EC, Annex III (EC declaration of conformity), text as adopted by the EU, legislation.gov.uk (current EU version: EUR-Lex)
- Decision No 768/2008/EC, Annex I, Articles R2 and R10, text as adopted by the EU, legislation.gov.uk
- Your Europe: signing an EU declaration of conformity
- Your Europe: CE marking
- GOV.UK: placing UKCA or CE marked products on the market in Great Britain
- Regulation (EU) 2023/988 (GPSR), EUR-Lex