A technical file is the set of records a manufacturer prepares before selling a product, showing how it was designed and made, its risks and how they were handled. For CE and UKCA products, and consumer products under the EU General Product Safety Regulation (GPSR), it is normally kept for 10 years and shown to authorities on request.
What is a technical file?
UK government guidance calls it a technical file. EU guidance and the GPSR call it technical documentation. In practice they mean the same set of records, and this guide uses both names.
The EU’s Your Europe guidance describes it as detailed information on the design, manufacture and operation of a product that must show the product meets all EU requirements. It is your evidence. A listing, a label or a supplier’s promise is not.
If you sell into the EU from outside it, the file also matters to your EU responsible person. Under the GPSR, the economic operator responsible for a product in the EU has to check that the technical documentation has been drawn up, keep it available to market surveillance authorities and regularly check the product against it.
Which products need one?
- CE and UKCA marked products. UK guidance says that under the UKCA and CE regulations, manufacturers must prepare a technical file. EU guidance says the documentation is needed to support an EU declaration of conformity and to affix the CE marking where it is required.
- General consumer products sold in the EU or Northern Ireland. Under the GPSR, manufacturers must carry out an internal risk analysis and draw up technical documentation before placing a product on the market, and keep it for 10 years. This applies even when no CE law covers the product.
- Great Britain. The GPSR applies in Northern Ireland but not in England, Scotland or Wales, which stay under the UK General Product Safety Regulations 2005. For CE or UKCA products sold in Great Britain, the UKCA and CE guidance above applies.
Medical devices have their own rules, and this guide does not cover them.
What goes in a technical file: a checklist
For CE and UKCA products
Your Europe lists what the documentation should include at least. UK guidance for the UKCA and CE regimes adds test reports and design documents.
- The manufacturer’s name and address, or those of any authorised representative
- A brief description of the product
- Product identification, such as a serial number
- Names and addresses of the sites involved in design and manufacture
- Name and address of any notified body involved, if one was needed
- The conformity assessment procedure followed
- Which EU rules apply, and which of their essential requirements are relevant
- The technical standards used to show compliance (for example EN, ISO or IEC)
- A risk assessment, and how each risk is dealt with (through design or standards)
- Critical components and materials, with the evidence for them (such as test reports)
- Design documents
- The product label and user instructions
If a product falls under more than one EU law, the documentation has to show which parts or functions fall under which law and which standards were used for each. If you used non-harmonised standards or in-house methods, explain why and how they show conformity.
For general products under the GPSR (EU and Northern Ireland)
UK guidance on the GPSR in Northern Ireland says the technical documentation should give a general description of the product and the characteristics relevant to its safety. The responsible economic operator checks that it contains, where they apply:
- an analysis of the possible risks and the solutions used to remove or reduce them
- a list of any relevant standards that apply to the product, including any declaration of conformity
Technical file or declaration of conformity?
They are different documents. The technical file is the evidence. A declaration of conformity is the signed statement that the product meets the laws named in it, and it belongs to the CE (and UKCA) regime. For a general product that only falls under the GPSR, what the law asks for is the risk analysis and technical documentation, not a declaration of conformity. If your product does need one, our guide to what goes in an EU and UK declaration of conformity sets out each element.
Who keeps it, and for how long
| Who | What they do with the file |
|---|---|
| Manufacturer | Draws it up before the product goes on the market and keeps it. EU guidance says 10 years from placing on the market unless a law says otherwise. |
| Authorised representative (UKCA/CE) | Keeps the technical documentation when the manufacturer asks it to in writing. |
| Importer (UKCA/CE in Great Britain) | Makes sure the manufacturer drew up the documentation, and keeps it. |
| Responsible economic operator (GPSR) | Checks it exists, keeps it available to authorities for 10 years and regularly checks the product against it. |
For the UKCA and CE regimes in Great Britain, the 10 years (typical, check your sector’s law) runs from when each individual product is placed on the market, not the first of a production run. The file can be in any official EU language, though authorities may ask for a translation of the parts they need. It can be kept electronically, as long as it stays organised, accessible and available on request.
Worked example (fictional business)
Fernside Home is a made-up UK brand that sells cotton cushion covers to customers in Germany and Northern Ireland. For this example, assume no CE law applies to the covers, so the GPSR is the main safety law. Before listing, Fernside’s file holds:
- A description of the covers, photos, sizes and the batch numbering used on the labels.
- The maker’s name and address, and the site where the covers are sewn.
- A risk analysis: who uses them, what could go wrong (for example a zip pull coming loose) and what was done about each risk.
- Any standards the maker used, with the reports that back them up.
- The label, care instructions and safety information exactly as the customer sees them.
- The name and contact details of its EU responsible person, who has seen the file and can produce it if an authority asks.
When Fernside adds a new fabric from a new mill, it updates the file before the new batch is listed, not after.
Common gaps in technical files
- Written after the product went on sale. The rules say before.
- Standards named, evidence missing. A list of standards with no test reports behind it proves little.
- Nothing ties the file to the product. Batch or serial numbers on the product should match the records.
- Nobody can find it. Electronic is fine, but it has to be organised and available when asked for.
- One file stretched across different products. A new material, supplier or design change needs its risks looked at again.
Templates and help
Want it done for you? Our technical file service puts together your CE or UKCA technical file and Declaration of Conformity, from £495 per product. Our compliance template packs include declaration of conformity, risk assessment and technical file templates by product category. A template is a starting point: the risk analysis, any testing and the checks still have to be real for your product. If you sell from outside the EU or Northern Ireland and need someone established there to take on the responsible person role, see our EU and UK Responsible Person service. For the wider picture, read what the GPSR is and who it covers or our UKCA marking guide.
FAQs
Is a technical file the same as technical documentation?
In practice, yes. UK guidance uses “technical file” and EU guidance and the GPSR use “technical documentation” for the records that show a product is safe and meets the rules that apply to it.
Does every product need a declaration of conformity?
No. A declaration of conformity belongs to the CE and UKCA regimes. A general product under the GPSR alone needs a risk analysis and technical documentation instead.
How long do I keep a technical file?
Usually 10 years from when the product is placed on the market, unless the law for your product says otherwise.
Can the technical file be digital?
Yes. It can be stored electronically, as long as it stays accessible, organised and available to authorities when they ask.
Does the GPSR apply in Great Britain?
No. It applies in the EU and Northern Ireland. Great Britain stays under the UK General Product Safety Regulations 2005.