Home appliance compliance: EU and UK rules for kettles, fans, heaters and other electricals

Home appliance compliance in the EU and UK is a stack of separate laws, not one certificate. A mains-powered kettle, fan or air fryer usually has to meet electrical safety, electromagnetic compatibility and hazardous substances rules before it can carry CE marking, and many appliances also fall under ecodesign, energy labelling, WEEE and battery rules.

This guide is for brands outside the UK and EU selling small and large household appliances on Amazon or other marketplaces. If you need an EU or UK name and address for your labels and listings, see our EU and UK Responsible Person service.

The home appliance document stackWhat a mains appliance needs for EU and UK sale, in six layers. Test: the Low Voltage, EMC and RoHS rules, plus the Radio Equipment rules if it is wireless. Prove: a technical file and test reports. Declare: EU and UK Declarations of Conformity. Energy: ecodesign rules and the energy label, registered in EPREL. Recycle: WEEE, battery and packaging producer responsibility. Represent: an EU and UK responsible person. CE or UKCA marking goes on after the first three steps.The home appliance document stackWhat a mains appliance needs for EU and UK sale1 TestLVD, EMC and RoHS (RED if wireless)2 ProveTechnical file and test reports3 DeclareEU and UK Declarations of ConformityEnergyEcodesign and energy label (EPREL)RecycleWEEE, battery and packaging EPRRepresentEU and UK responsible personCE or UKCA marking goes on after steps 1 to 3.
The layers of law and paperwork behind a home appliance sold in the EU and Great Britain.

Who these rules apply to

The rules apply to whoever places the appliance on the market: the manufacturer, or the brand that puts its name on it, plus the importer and anyone distributing it. If you sell an own-brand appliance made by a factory abroad, you are its manufacturer for these purposes. That covers kitchen appliances such as kettles, toasters, blenders and air fryers, heating and cooling products such as fans and heaters, personal care items such as hair dryers, and large appliances such as fridges and washing machines.

The laws that apply

EU lawWhat it coversGreat Britain
Low Voltage Directive 2014/35/EUElectrical safety for equipment rated 50 to 1,000 V AC or 75 to 1,500 V DCElectrical Equipment (Safety) Regulations 2016
EMC Directive 2014/30/EUElectromagnetic interference and immunityElectromagnetic Compatibility Regulations 2016
RoHS Directive 2011/65/EURestricted substances such as lead, mercury and cadmium in electrical equipmentRoHS Regulations 2012
Radio Equipment Directive 2014/53/EUAppliances with Wi-Fi or Bluetooth; cybersecurity requirements have applied since 1 August 2025Radio Equipment Regulations 2017; product security rules (PSTI) for connectable products since 29 April 2024
Ecodesign: ESPR (EU) 2024/1781 and product measures made under Directive 2009/125/ECEnergy use, standby power and other design rules for listed product groupsEcodesign for Energy-Related Products Regulations 2010
Energy Labelling Regulation (EU) 2017/1369Energy labels and EPREL registration for listed product groupsEnergy Information Regulations 2011, with GB labels
WEEE Directive 2012/19/EUProducer registration and take-back in each countryWEEE Regulations 2013
Batteries Regulation (EU) 2023/1542Batteries in or supplied with the applianceWaste Batteries and Accumulators Regulations 2009
GPSR (EU) 2023/988Risks not covered by the laws above, and information in online listingsGeneral Product Safety Regulations 2005

Appliances that touch food, such as kettles, blenders and air fryer baskets, are also covered by food contact materials rules. In Great Britain, the government’s position is that CE marking remains recognised for products under the electrical safety, EMC, RoHS, radio and ecodesign regulations, so most sellers can use the same CE-marked product in both markets. Our guide to UKCA marking explains the details.

What the appliance, label and documents need

On the product and packaging

  • CE marking (and, if you choose, UKCA for Great Britain)
  • a rating plate with the electrical ratings set by the safety standard
  • a type, batch or serial number
  • the manufacturer’s name and postal address, and the importer’s details where there is one
  • the crossed-out wheeled bin symbol for WEEE
  • instructions and safety information in the language of the country of sale
  • for the UK, a plug that meets the UK plug rules

Behind the product

The technical file is the evidence behind the CE mark. For household appliances it usually includes test reports to the EN 60335 safety series (part 1 plus the part for your product type), EMC reports to EN 55014, RoHS evidence such as material declarations or test results, the circuit diagram, the bill of materials and your risk assessment. You then sign an EU Declaration of Conformity, and a UK one if you use UKCA. Keep both for 10 years. Our Declaration of Conformity guide and technical file guide show what goes in each.

Energy labels and EPREL

Fridges, washing machines, dishwashers, tumble dryers, ovens, range hoods, TVs and lamps are among the product groups with an energy label. Before placing one on the EU market, the supplier (the manufacturer, importer or authorised representative) must register the model in the EU product database, EPREL. Online listings must show the label and the product information sheet. Most small kitchen appliances, such as kettles and toasters, have no energy label, but check the product-specific ecodesign measures before you assume nothing applies.

Great Britain uses its own labels, which you can create through the GOV.UK energy label service. Labels for products sold in Northern Ireland are created in EPREL.

WEEE, batteries and packaging

Every EU country runs its own WEEE register, and you must register as a producer in each one you sell to. If you sell into a country without being established there, you usually need an authorised representative for WEEE in that country. Amazon checks EPR registration numbers in some stores, Germany and France in particular.

The Batteries Regulation is phasing in: producer responsibility rules have applied since 18 August 2025, new labelling requirements are being introduced from August 2026, and rules on removable and replaceable portable batteries are due from February 2027. Packaging EPR applies on top. Our EPR registration service covers WEEE, batteries and packaging, and our EPR cost guide sets out what you pay.

Why a non-EU or non-UK seller needs a responsible person

For CE-marked products such as electrical appliances, EU market surveillance law requires an economic operator established in the EU: a manufacturer, importer, authorised representative or fulfilment service provider. Their name and contact details go on the product, packaging or accompanying document, and they must be able to give authorities the Declaration of Conformity and technical file on request.

For Great Britain, importers and authorised representatives for UKCA or CE goods must be established in the UK. An EU representative does not cover GB, and a UK one does not cover the EU. Our article on UK Responsible Person requirements sets out the differences.

Common Amazon pitfalls

  • A CE mark with no evidence. A factory certificate of compliance is not a Declaration of Conformity, and it is not a test report. Amazon and authorities may ask for both.
  • Reports for a different model. Test reports must match your model, ratings and factory, and should be in your brand’s name or tied to it.
  • Wireless features ignored. An app-controlled heater or smart plug brings in radio equipment rules, EU cybersecurity requirements and, in the UK, the product security regime.
  • Missing energy labels or product information sheets on listings for labelled product groups.
  • No WEEE registration number for Germany or France, which can stop a listing.
  • English-only manuals on EU listings, or EU plugs on UK listings.

Home appliance compliance checklist

  1. List every law that applies, including radio, ecodesign and energy labelling.
  2. Get test reports for the exact model against the current standards.
  3. Build the technical file and sign the EU (and, if needed, UK) Declaration of Conformity.
  4. Add CE marking, the rating plate, batch number, your details and the WEEE symbol.
  5. Register labelled models in EPREL and create GB labels where needed.
  6. Register for WEEE, batteries and packaging EPR in each country you sell to.
  7. Translate the instructions and safety information.
  8. Appoint an EU responsible person and a UK importer or authorised representative, and add their details.
  9. Keep everything for 10 years.

Your next step

If you sell appliances into the EU or Great Britain from outside, EU Brand Support can act as your EU or UK Responsible Person, giving you an address for labels and listings, reviewing your Declaration of Conformity and test reports, holding your technical file and handling authority requests. Our Home Appliances compliance template pack includes Declaration of Conformity, risk assessment and technical file checklist templates in EU and UK versions. Questions about a specific product? Contact us.

This guide is general information, not legal advice. Check the rules for your specific product.

Frequently asked questions

Do I need UKCA marking to sell appliances in the UK?

Not for most appliances. Great Britain continues to recognise CE marking for products under the electrical safety, EMC, RoHS, radio and ecodesign regulations. You still need a UK-established importer or authorised representative.

Does a kettle need an energy label?

Not at present. Energy labels apply only to the product groups listed in the EU and GB energy labelling rules, and kettles are not one of them.

Do I need to register for WEEE in every EU country?

Yes, in each country where you place appliances on the market, often through an authorised representative there.

Who signs the Declaration of Conformity?

The manufacturer, or an authorised representative it has given a written mandate to. The person signing takes responsibility for the product’s compliance.

Sources