The PPWR is the EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, and it has applied in every EU country since 12 August 2026. For online sellers it means packaging rules that travel with each parcel: if you sell directly to consumers in an EU country where you are not established, you are treated as the packaging producer there and must meet that country’s extended producer responsibility (EPR) duties.
Not sure where you stand? Try our free PPWR checker: answer five questions and see, country by country, whether you are likely to need packaging EPR registration and an authorised representative.
This guide is for sellers outside the EU, including UK sellers, who ship packaged goods to EU customers. If you already know you need to register, our EPR registration hub sets out how the registrations work country by country.
What is the PPWR?
The PPWR entered into force on 11 February 2025 and applies from 12 August 2026. It replaces the 1994 Packaging Directive (94/62/EC), which was generally repealed on that date, although the Commission notes that some of its provisions continue to apply.
EPR registration still runs through national registers: the Commission says you must keep following national EPR rules in the country where your packaging is likely to become waste.
What changed for online sellers on 12 August 2026
You can be a producer in each country you ship to
If you sell directly to end users in a member state where you are not established, you are the producer in that member state. For cross-border e-commerce, the packaging is placed on the market in the buyer’s country. Producer status is assessed country by country, so you may be a producer in some countries and not others.
There is no single EU-wide registration. Each member state runs its own producer register, and producers register, report packaging volumes and pay fees in each one.
An authorised representative where you are not established
Article 45(3) requires producers selling directly to end users in a member state where they are not established to appoint an authorised representative for EPR there. The Commission states that since August 2026 the requirement applies in all member states. Our guide to the PPWR authorised representative covers who needs one, what it does and what it costs.
Marketplaces and registration numbers
The picture here is mixed:
- The Commission says online platforms are currently not required to ask for an EPR registration number. Once harmonised national registers exist, you will have to give the platform your national registration number before you use its service.
- Some platforms are not waiting. eBay says that from 12 August 2026 sellers into EU markets must provide EPR packaging registration numbers, that it will ask sellers to self-certify, and that listings may be hidden in countries where numbers are missing.
- Under its own packaging law, Germany has required electronic marketplaces to check that sellers are registered in the LUCID packaging register since 1 July 2022, and to block goods from sellers who are not.
A Declaration of Conformity for packaging
Packaging placed on the EU market now needs an EU Declaration of Conformity under Article 39 and Annex VIII, and technical documentation kept for at least 5 years for single-use packaging and 10 years for reusable packaging. Guides from Packaging Europe and Coolset describe the declaration as covering the requirements of Articles 5 to 12, with a separate declaration for each format, material and configuration.
Sources differ on how much it must cover today. PPWR Connect reports a Commission factsheet of 19 October 2026 saying the declaration only needs to cover the substance requirements for now. We could not open that factsheet ourselves, so ask your packaging supplier which version they issue and keep a copy.
Substance limits, including PFAS
From 12 August 2026, food-contact packaging must not exceed these PFAS limits: 25 ppb for any single PFAS, 250 ppb for the sum of targeted PFAS, and 50 ppm for total PFAS including polymeric PFAS. A combined limit of 100 mg/kg for lead, cadmium, mercury and hexavalent chromium applies to all packaging.
According to Packaging Europe, a June 2026 Commission Notice says packaging produced before 12 August 2026 that exceeds the PFAS limits does not need to be withdrawn.
What comes later: empty space, recyclability and labels
| Date | What applies |
|---|---|
| 12 February 2028 | Fillers must keep empty space in sales packaging to the minimum needed for the packaging to work |
| 12 August 2028 (or 24 months after the implementing acts, if later) | Harmonised material-composition label |
| 1 January 2030 (or 36 months after the implementing acts, if later) | Maximum 50% empty space ratio for grouped, transport and e-commerce packaging; filling material such as bubble wrap counts as empty space |
| 1 January 2030 | Recyclability grades apply; packaging below grade C cannot be placed on the market |
| 1 January 2035 | All packaging must be recyclable at scale |
| 1 January 2038 | Packaging should be at least grade B |
The calculation method for the 50% rule is still to be set by implementing act, so check it before you redesign your shipping boxes.
What a non-EU or UK seller should do now
- List every EU country you ship to directly, including through your own website and marketplaces where you are the seller.
- Work out your producer status in each one. If an EU importer or distributor first makes your goods available there, it may be the producer instead of you.
- Register with the national register in each country where you are the producer, and join the relevant compliance scheme. Registration can take several weeks.
- Appoint an authorised representative in each of those countries by written mandate.
- Collect your registration numbers and add them to your marketplace accounts. Check that any existing numbers, such as a German LUCID number, are still accurate.
- Get packaging paperwork from suppliers: a Declaration of Conformity and, for food-contact packaging, evidence on PFAS.
- Measure your packaging volumes by material, as reports and fees are based on them.
- Plan for 2030: right-size e-commerce boxes and ask suppliers about recyclability grades.
Small producers, defined by the Commission as those producing less than 10 tonnes of packaging a year, may get lighter treatment, such as reduced registration fees or flat fees, but only where a member state chooses to offer it.
A note for UK sellers
Selling from the UK does not take you out of scope: the PPWR applies to producers shipping into the EU from other countries. UK packaging EPR is a separate scheme with its own thresholds (turnover of £1 million or more and over 25 tonnes of packaging handled), so meeting one does not cover the other.
Worked example: a UK homeware brand selling into the EU
A fictional UK brand sells ceramic mugs from its own warehouse. Orders come from its website and from its own seller account on amazon.de, and parcels go to customers in Germany and France. It has no EU company or branch.
- Producer status: it sells directly to end users in Germany and France and is not established in either, so it is the producer in both.
- Registration: it needs a LUCID registration in Germany and a French registration, each with its own number. A German number does not cover France.
- Representation: it appoints an authorised representative in Germany and another in France, each under a written mandate.
- Packaging: its gift boxes are not food-contact packaging, so the PFAS limits do not apply to them, but it still asks its box supplier for a Declaration of Conformity.
Your next step
EU Brand Support handles EU and UK Responsible Person cover and EPR registration for sellers outside the EU and UK. Where a country also requires a PPWR authorised representative, we work with established local representatives in that country, so you have one point of contact across your registrations.
Start with our EPR registration page, or contact us with the countries you ship to and the packaging you use.
This guide is general information, not legal advice.
Frequently asked questions
When did the PPWR come into force?
It entered into force on 11 February 2025 and has applied since 12 August 2026. Several requirements, such as the empty space ratio and recyclability grades, start later.
Does the PPWR apply to UK sellers?
Yes, if you sell packaged goods to customers in the EU. Producer status is assessed in each EU country you ship to, and UK packaging EPR does not count towards it.
Do I need a separate EPR registration in every EU country?
Yes, in each country where you are the producer. There is no single EU-wide registration.
Sources
- EUR-Lex: Regulation (EU) 2025/40 on packaging and packaging waste
- European Commission: Packaging waste
- European Commission: Extended producer responsibility for packaging, small businesses
- ZSVR: Overview of the Packaging Act amendments
- eBay: Packaging and Packaging Waste Regulation
- Coolset: PPWR Q&A
- Fieldfisher: New EU packaging and packaging waste rules
- Packaging Europe: First PPWR rules officially apply (12 August 2026)
- PPWR Connect: PPWR update, October 2026
- Taxually: EPR obligations by country
- EPR Representative: PPWR Article 45