A GPSR risk assessment is the manufacturer’s written analysis of what could go wrong with a consumer product, who could be hurt and what was done about it. Under the EU General Product Safety Regulation it must be done before the product goes on sale in the EU or Northern Ireland, and kept with the technical documentation for 10 years.
Regulation (EU) 2023/988 calls it an internal risk analysis. This guide gives you a template built from the safety aspects the law lists, the step-by-step method the UK’s Office for Product Safety and Standards (OPSS) uses for its own assessments, and a worked example. If you sell into the EU from outside it, this is also one of the first documents your EU responsible person needs to see, because checking that it exists is part of their job.
What the GPSR asks for, and from whom
The GPSR has applied since 13 December 2024 to products placed on the market from that date. It covers consumer products where no specific EU rules with the same aim exist; where sector rules do exist, it covers only the risks they don’t. GOV.UK’s detailed guidance on the Regulation sets out who does what with the risk analysis:
| Who | What they do with the risk analysis |
|---|---|
| Manufacturer | Carries out the internal risk assessment and draws up technical documentation before placing the product on the market. The documentation gives a general description of the product and the characteristics relevant for assessing its safety. |
| Importer | Makes sure the manufacturer has done the risk assessment and drawn up the technical documentation before the product goes on the market. |
| Responsible economic operator (often called the EU responsible person) | Checks that the technical documentation has been drawn up and contains, where they apply, an analysis of possible risks with the solutions used to remove or reduce them, and a list of the relevant standards. Keeps it available to market surveillance authorities for 10 years, regularly checks the products against it, and provides it on a reasoned request. |
A Declaration of Conformity is a different document. It belongs to the CE regime; for a general product covered by the GPSR alone, what the law asks for is the risk analysis and technical documentation. Our technical file guide lists everything else that sits alongside the risk analysis, and our GPSR explainer covers the wider regulation.
What the assessment has to consider
The GPSR sets out the aspects to take into account when deciding whether a product is safe. Each one becomes a question your risk assessment should answer:
| Aspect in the GPSR | The question to answer |
|---|---|
| Characteristics: design, technical features, composition, packaging, assembly, installation, use and maintenance instructions | What could fail, break, come loose, heat up, leak or trap a finger? |
| Effect of other products used with it, including non-embedded items that change how it works | What will people plug in, attach, refill or charge it with? |
| Effect it has on other products, including interconnection | What could it damage or interfere with? |
| Presentation, labelling and age suitability | Does the packaging or listing invite unsafe use? |
| Categories of consumers, especially children, older people and persons with disabilities, and gender differences | Who will really use it, not only who it is aimed at? |
| Appearance: food-imitating products, or products likely to appeal to or be used by children | Could a child mistake it for food or a toy? |
| Cybersecurity features, where the nature of the product requires them | For connected products: could outside interference make it unsafe? |
| Evolving, learning and predictive functions, where relevant | For smart products: could a change in behaviour create a new risk? |
A GPSR risk assessment template, section by section
Use one assessment per product, or per group of products that share a design, materials and supplier. A new material, supplier or design change is a reason to look at the risks again.
| Section | What to write | Evidence to attach |
|---|---|---|
| 1. Product identification | Name, model, type, batch or serial numbering, photos | Photos of the product, label and packaging |
| 2. Intended use and users | What it is for, who buys it, who else is likely to use it, and reasonably foreseeable misuse | Listing text, instructions |
| 3. Rules that apply | Any sector law (for example toy or electrical law) and which risks are left for the GPSR | Your own scoping note |
| 4. Hazards | Each hazard on its own line: mechanical, thermal, chemical, choking, fire, and the rest that fit your product | Supplier specifications, material data |
| 5. Harm scenarios | For each hazard, the steps from normal use to injury, and who is hurt | Complaints, returns, incident data |
| 6. Severity and likelihood | How bad the injury could be, and how likely each step is | Test reports, standards used |
| 7. Measures | What removes or reduces each risk: design change, guard, material, test, then warning | Test reports after the change |
| 8. Warnings and instructions | The exact safety text, in each language you sell in | Label and insert artwork |
| 9. Conclusion | Whether the remaining risk is acceptable for sale, and why | Signed and dated |
| 10. Review log | Date, what changed (supplier, design, complaint) and what you did | Updated reports |
How to write harm scenarios: the OPSS method
The hardest part of any risk assessment is section 5. OPSS’s Product Safety Risk Assessment Methodology (PRISM) is written for market surveillance authorities in Great Britain, not for sellers, but it shows the level of reasoning an authority will apply. OPSS says it is aligned with the EU Safety Gate approach and reflects the same risk level matrix, and that its Excel toolkit is used by non-regulators to record post-market risk assessment outcomes.
OPSS’s worked example for a portable juice blender shows the method:
- Name the hazard. The blades could start with the bottle removed, because there was no interlock.
- Say who could be harmed. Anyone handling the base with the blades exposed.
- Write the steps to harm. The user removes the bottle; doesn’t attach the blade guides for storage; presses the power button twice by accident; touches the turning blades.
- Grade the injury. PRISM uses severity levels; cuts in this scenario were rated a level 2 injury, while a battery fire in another scenario was rated level 4.
- Give each step a probability and multiply them. 1.0 × 0.1 × 0.01 × 0.25 = 0.00025, or 1 in 4,000, which the example rated a medium risk.
Two lessons carry straight into your own assessment. First, scenarios with the same injury level can be combined: the blender’s two 1 in 4,000 scenarios became about 1 in 2,000 for the product. Second, OPSS warns that the probabilities in its examples are illustrations and should not be copied into other assessments. Your numbers have to come from your own product, tests and complaints. In its 2024 update, OPSS also added “functional” hazards to its list: harm linked to what the product is for, such as drowning with products used on or near water.
Worked example: a folding wooden step stool
A fictional UK brand sells a two-step folding stool for kitchens and wants to list it in Germany and France. For this example, assume no sector law covers it, so the GPSR applies in full.
| Hazard | Harm scenario | Who | Measure |
|---|---|---|---|
| Collapse under load | Hinge lock not fully engaged; user stands on it; stool folds; fall from height | Adults, older users | Lock that clicks visibly into place; load test on each new batch; maximum load on the label |
| Finger trap in the hinge | User folds the stool with a hand on the frame; fingers caught in the closing gap | Adults, children helping | Wider gap or cover at the hinge; folding instructions with a picture |
| Tipping sideways | User leans to reach a high shelf; stool tips | All users | Wider base, non-slip feet; warning not to over-reach |
| Splinters | Rough edge on a step; hand or foot cut | All users | Sanded edges checked at goods-in |
| Climbed by children | Child uses it to reach a worktop; falls | Children (a likely user, not the intended one) | Warning on the stool and in the listing; no toy-like colours or shapes |
The brand records a conclusion for each line, translates the warnings into German and French, and adds a review trigger: any complaint about the hinge reopens the assessment. The test reports and the signed assessment go into the technical documentation, where its EU responsible person can check them.
Reduce the risk first, warn last
A warning doesn’t make a dangerous design safe. In Great Britain the 2005 Regulations say so directly: the presence of warnings does not exempt anyone from the other requirements. So in section 7, change the design, materials or testing first, and use warnings only for the risk that is left.
Whatever is left must reach the buyer. Under the GPSR, a product that can’t be used safely without them must come with clear instructions and safety information in a language consumers can easily understand, and online listings must show warnings in the local language. Our guide to GPSR warnings and safety information shows how to turn the risk assessment into label and listing text.
Keeping the assessment current
- Before sale, not after. The GPSR asks for the risk analysis before the product is placed on the market.
- On every change. New supplier, new material, new design or a new country with a different language.
- On every complaint. In Great Britain, GOV.UK’s list of producer duties includes sample testing marketed products and investigating, and if necessary keeping a register of, safety complaints. The same habit gives your EU file the evidence it needs.
Great Britain and Northern Ireland
The GPSR applies in Northern Ireland but not in Great Britain, which stays under the General Product Safety Regulations 2005. In Great Britain the producer must make sure a product is safe before placing it on the market, give consumers the information they need to assess risks that aren’t obvious, mark the product for traceability and take steps to stay informed of risks. In our view, a written risk assessment is the simplest way to show you did that, even where the GB rules don’t ask for one in the GPSR’s terms. If you ship to Northern Ireland, the responsible operator must be established in Northern Ireland or the EU; our guide to GPSR for UK small businesses explains when each set of rules applies.
Your next step
If you sell into the EU or Northern Ireland from outside, EU Brand Support can act as your EU Responsible Person: we hold and review your technical file, including the risk assessment, before we take a product on, and tell you what is missing. If you would rather build the file yourself, our compliance template packs include a risk assessment template for each product category, at £45 per category. A template is a starting point: the hazards, tests and conclusions still have to be real for your product.
This guide is general information, not legal advice.
Frequently asked questions
What is GPSR compliance?
Making sure a consumer product placed on the EU or Northern Ireland market is safe, has an economic operator established in the EU (or, for Northern Ireland, in Northern Ireland or the EU) responsible for it, carries the required identification and contact details, and is backed by a risk analysis and technical documentation. Our GPSR explainer covers each part.
Who writes the GPSR risk assessment?
The manufacturer, meaning whoever makes the product or has it made and sells it under their own name or trade mark. The importer makes sure it exists, and the responsible person checks it and keeps it available to the authorities.
Is a GPSR risk assessment the same as a Declaration of Conformity?
No. A Declaration of Conformity belongs to the CE regime. A product covered by the GPSR alone needs a risk analysis and technical documentation instead.
Do I need a GPSR risk assessment for UK sales?
For Northern Ireland, yes: the GPSR applies there. For Great Britain, the GPSR doesn’t apply; the General Product Safety Regulations 2005 do, and they still require you to sell only safe products.
How long do I keep it?
The technical documentation, including the risk analysis, is kept for 10 years and made available to market surveillance authorities on request.
Sources
- GOV.UK: EU Regulation 2023/988 on General Product Safety, detailed guidance (Northern Ireland)
- GOV.UK (OPSS): Product Safety Risk Assessment Methodology (PRISM) (last updated 10 October 2024)
- GOV.UK (OPSS): PRISM narrative style risk assessment, non-compliant portable juice blender
- GOV.UK: General Product Safety Regulations 2005, Great Britain guidance
- legislation.gov.uk: General Product Safety Regulations 2005, regulation 7